Are you stuck with the wavlink router flashing red issue? No Worries! However, this is considered a very common issue among networking devices. Similarly, before you go ahead with the troubleshooting steps to fix this problem with your router, it is necessary to understand the reason behind this issue. So, to find all this detailed info, stay tuned to this brief post.
Why is the Wavlink router red light blinking frequently?
Before you move forward towards the effective troubleshooting tips to resolve the red light issue on your Wavlink router, must walk through the responsible causes for it which as mentioned below:
- Network connectivity issues
- Faulty hardware
- Insufficient power supply
- Device overheating
- Outdated/Corrupted firmware
- Technical glitches or bugs
How to troubleshoot the wavlink router flashing red issue?
Additionally, you now find the root causes that give rise to the blinking red light issue on the Wavlink networking gateway. Further, it is time to find effective troubleshooting tips to fix the Wavlink router red light problem. In this section, we shed light on the quick fixes for resolving this error on your networking device, take a look:
Ensure a stable network connection
In general, if you use a wireless network connection, then you must ensure strong signals. Additionally, if the connection is weak or unstable, then use an ethernet cable to stabilize the internet.
Check the router hardware
While using the router, check its hardware first. Ensure none of the components are faulty or broken, like antennas, outer case, etc. Also, look at the cables and an adapter as these are in working condition and not damaged. If you find any, then replace it immediately.
Approach your ISP authority
If there are persistent network issues or local area network courage, then must contact your ISP service provider. They will let you know about the reasons behind the connectivity issues and suitable fixes too.
Ensure sufficient power supply
Check that the power cable and adapter you use are of the original brand. Additionally, do not use broken or burnt power outlets. Confirm that the cable connections are joined properly, deliver adequate voltage, and work fine.
Cool down the router
If the router is placed in a congested place where air crossing is limited, then router overheating is common and this will give rise to wavlink router flashing red issue. Therefore, it is recommended to relocate your networking device to a ventilated place.
Eliminate signal interferences
When there are signal obstructions present, then a red light error is common with your networking device. So, it is necessary to remove these signal barriers, such as mirrors, microwaves, furniture, etc. If it is not possible to eliminate these obstructions, then relocate your networking gateway.
Power cycle the Wavlink router
If there are technical errors or bugs present on the router, then it is advisable to reboot it. To do so, plug out the router and modem for 30 seconds. After that, plug them back and check if the red light issue gets fixed.
Upgrade the firmware
Sometimes the wavlink router red light problem occurs when the router runs on outdated or corrupted firmware. Additionally, it is essential to check and update the networking device’s firmware or approach us if need help with this.
Factory reset Wavlink router
When none of the given methods work, then must opt for the hard reset process. In short, factory resetting your router will bring it back to its default settings and you need to reconfigure it from scratch.
Final Words
All in all, this brief post provides you with detailed information on the Wavlink router flashing red light issue. Here, you find the primary causes behind this error and easy troubleshooting tips to fix it.